ProVecta 3D Prime
Taking diagnostics to the next level ProVecta 3D Prime combines diagnostic flexibility, ease of use and lower radiation dose. The ProVecta 3D Prime generates a unique 130mm x 85mm jaw-shaped anatomically adapted volume that encompasses all treatment areas without imaging non-relevant anatomy.
- 3D & 2D X-ray images with exceptional image quality
- The anatomically adapted jaw-shaped 3D image includes all dentition, including third molar area c50 x 50 mm volumes in 80 or 120 μm resolution Highest resolution CsI flat panel sensor – creates brilliant, high-quality 3D & 2D images from one sensor, no swapping, no complications
-
Item #: i871ai0001
Air Techniques #: A7750
ProVecta 3D Prime Specifications
| X-ray HV Generator | Voltage, current: 0 – 99 kV, 4 – 16 mA Rated power: 51.6 KW |
| Tube | Focal spot size: 0.5 mm (IEC60336) Total filtration: 2.8 mm AL |
| Image Detector | Type: Csl CMOS photodiode array Pixel size: 49.5 μm Active sensor surface: 135.8 x 36.4 mm |
| Scan Times | From 2 to 18 seconds |
| Panoramic programs | Panoramic image: 14 Image capture programs for children: 4 |
| Magnification factor | 2D images: 1.26 |
| 3D volumes | 130 x 85 mm diagnostic 130 x 70 mm diagnostic 50 x 50 mm |
| Device dimensions | Height: 551/2'' x 881/2'' Weight: 396 lbs Height adjustment range: 33'' Width x Depth: 473/4'' x 61'' Installation: Wall mounting |
| Electrical connections | Mains voltage: 200 – 240 V AC Frequency: 50/60 Hz Rated power: 2. 2 kVA |